Syspend VL-Motion Arm, Type 4
Syspend VL-Motion Arm, Type 4
Vertical motion pendant arm effortlessly lifts, lowers and repositions HMI enclosures in NEMA Type 4 and 12 environments. Gas spring counterbalance can be adjusted for loads of 30-100 lb. Release handle and locking mechanism are ideal for applications where machine vibration is a concern.
Applications: Vertical motion pendant arm effortlessly lifts, lowers and repositions HMI enclosures in NEMA Type 4 and 12 environments. Gas spring counterbalance can be adjusted for loads of 30-100 lb. Release handle and locking mechanism are ideal for applications where machine vibration is a concern.
Features:
Field-adjustable gas-spring counterbalance supports loads of 30-100 lbs.
Gas springs are set to maximum pressure (100 lb. load) and lifting force can be reduced through a sealed access cap in the top of the arm (Lifting force cannot be increased once spring pressure is reduced.)
Provides 13 in. of vertical height adjustment
Release handle (included with arm) automatically locks arm in place when repositioned vertically (release handle is required to operate the arm)
Easily interfaces with Hoffman HMI enclosures using a 60-x-60-mm enclosure mounting pattern (enclosure must be ordered separately)
1.4-in. internal cable pathway maintains NEMA Type 4 and 12 enclosure rating and protects wires and cables
Gasketed mounting surfaces at both ends of arm maintain seal integrity
Enclosure and arm can be swiveled 320 degrees
Wall-mount, machine-top-mount and post-top-mount options available
Optional floorpost available
Specifications:
Aluminum construction
RAL 7035 light-gray finish
Gas spring counterbalance
Notes:
Mounting adapter required. Order separately.
Release handle included with arm.
CONDIVIDI / SHARE
Descrizione
Maintains NEMA Type 4 and 12 and IEC IP66 enclosure rating when properly installed per Hoffman instructions.