Zonex Non-Metallic Terminal Enclosure

    Richiesta informazioni

    Compila il form e invia una richiesta su questo prodotto

    Zonex Non-Metallic Terminal Enclosure

    Application: Zonex Non-Metallic Terminal Enclosure is ideal for field terminations in hazardous locations. The enclosure meets national and international standards and certifications. It can be used to protect equipment and terminations from corrosive contaminants while meeting rigorous demands. The cabinet is ideal for either panel- or din-mounted components. The enclosures meets ATEX Directives 94/9/EC and IECEx standards for increased safety in housing electrical components in Zone 1 and Zone 2 applications.
    Compression-molded, high-impact strength, fiberglass body and cover
    Cover includes recessed, retained, combination head (Straight blade, Phillips and Torx drive) M4 or M6 stainless steel Type 316 screws
    Retained, continuous, high-temperature silicon gasket within a labyrinth seal between cover and body
    Durable and reusable, internal M4 or M6 stainless steel inserts for DIN- and Panel-mounting
    Covered mounting screw provisions outside of gasketed area, sized M4 (#8) or M6 (¼-in.)
    Mounting location dimensions are molded into the back side of the enclosure
    Panel mounting screws included, M4 or M6
    Compression-molded fiberglass with added agents to address static charge build-up
    High-impact strength as well as high temperature-rated
    Increased Safety: Ex e applications
    Optional panels are pre-plated steel, 1.5mm (16 ga.) thick; or 2mm composite
    Molded material has a smooth, low-gloss, black finish
    Cover screws are matte stainless steel finish
    Din Rail
    Modifications and Customizations: Hoffman excels at modifying and customizing products to your specifications. Hoffman offers a Zonex-specific modification program. Contact your local Hoffman Representative or Distributor for more information.
    Notes: Intrinsically safe terminal blocks can be installed through modification program to provide a populated enclosure. IECEx populated enclosures require IECEx certified components specifically listed in the approving Certification (see IECEx SIR 09.0100 for more detail).


    ATEX Directive 94/9/EC
    Ex e IIC Gb
    Ex ta IIIC Da IP66
    Service temperature -55C to +135C

    IECEx IBE16.0049U
    Ex e IIC Gb
    Ex ta IIIC Da IP66
    IEC 60079-0
    IEC 60079-7
    IEC 60079-31
    Service temperature -55C to +135C

    Type 4, 4X, 12; File No. E61997
    UL508A Listed
    cUL Listed per CSA C22.2 No. 94; Type 4, 4X, 12; File No. E61997
    NEMA / EEMAC Type 4, 4X, 12
    IEC 60529, IP66

    Resta aggiornato

    Iscriviti alla News Letter per scoprire tutte le novità.

      Con l’iscrizione accetto l’informativa sulla privacy D.Lgs 196/2003